Gate Installation in Texas
The right gate completes your fence and secures your property. TX24H connects you with gate specialists who build and install walk gates, drive gates, and entry gates to match any fence style.
How It Works
Tell Us What You Need
Answer a few quick questions about your gate installation needs.
Get Matched With Pros
We connect you with verified gate installation professionals near you in Texas.
Compare & Choose
Review quotes, read real reviews, and pick the pro that fits your budget and timeline.
Gate Installation Prices in Texas
Average prices based on local market data. Actual prices may vary by city and scope.
| Service | Price Range |
|---|---|
Wood Walk Gate (3-4 ft) Cedar or pine with heavy-duty hinges and latch | $250-$600 |
Wood Double Drive Gate (10-12 ft) Vehicle access with steel frame reinforcement | $800-$2,000 |
Iron Walk Gate (3-4 ft) Ornamental iron with powder coat finish | $400-$1,000 |
Iron Double Drive Gate (12-16 ft) Heavy-duty with drop rod and wheel support | $1,500-$4,000 |
Vinyl Walk Gate Self-closing hinges with privacy panel | $300-$700 |
Sliding Track Gate (Manual) Rolls on ground track for wide openings | $2,000-$5,000 |
Frequently Asked Questions
How much does gate installation cost in Texas?
Gate installation in Texas ranges from $250 for a basic wood walk gate to $5,000 or more for a large sliding driveway gate. Standard wood walk gates cost $250 to $600, while double drive gates for vehicles run $800 to $2,000. Iron gates cost more, with walk gates at $400 to $1,000 and double drive gates at $1,500 to $4,000. The price depends on material, size, hardware quality, and whether automation is added.
What size gate do I need for vehicle access?
A standard vehicle drive gate should be at least 10 feet wide for single-vehicle access. For trucks, trailers, and RVs, go with 12 to 16 feet wide. Double drive gates that swing open from the center are the most common for residential driveways. If you do not have room for gates to swing open, a sliding gate that rolls along a track is the better choice. Measure your widest vehicle and add at least 2 feet of clearance on each side.
Should my gate swing in or out?
Gates should generally swing inward onto your property. This prevents the gate from blocking the sidewalk or street when open, which may violate local codes. For sloped driveways, the gate must swing in the direction that allows clearance over the slope. Walk gates to pool areas must swing outward away from the pool per Texas pool safety codes so that a child pushing on the gate from the pool side cannot open it.
What hardware do I need for a heavy gate in Texas?
Heavy gates in Texas need industrial-grade hardware that handles both the weight and the temperature extremes. Spring-loaded hinges with adjustable tension prevent gate sag over time. Stainless steel or galvanized hardware resists rust better than plain steel. For drive gates, a drop rod on one leaf and a cane bolt on the other keep the gate stable when closed. Gate wheels or rollers on the bottom of wide gates prevent dragging and reduce stress on hinges.
Can I add automation to an existing gate later?
Yes, most swing and slide gates can be retrofitted with an automatic opener later. However, planning for automation during initial installation saves money. Pre-run electrical conduit from the house to the gate post area, install a wider concrete pad for the motor mount, and ensure the gate is heavy-duty enough for an opener arm. Retrofitting without pre-planning typically costs 20 to 30 percent more than installing automation from the start.
Do pool gates have special requirements in Texas?
Yes, Texas pool safety codes require pool gates to be self-closing and self-latching with the latch mechanism at least 54 inches above the ground. The gate must open outward away from the pool. Spring hinges or pneumatic closers are standard. The gap under the gate cannot exceed 4 inches. Your gate installer should be familiar with your local pool barrier ordinance as some cities have stricter requirements than the state minimum.
Gate Installation Service Areas in Texas
We connect you with verified gate installation professionals in these neighborhoods and surrounding areas across Texas.
Houston
Dallas
San Antonio
Austin
Fort Worth
El Paso
Arlington
Plano
Corpus Christi
Lubbock
Frisco
McKinney
Round Rock
Georgetown
Cedar Park
Pflugerville
Denton
Waco
Don't see your area? We likely cover it. Get a free quote and we'll match you with a local pro.
Your Data is Safe With TX24H
We never sell your information, never add you to marketing lists, and never share your data with anyone except the one pro matched to your request. Your info is automatically deleted after 30 days.
Related Fencing Services
Other fencing services available from licensed Texas professionals.
Ready to find the best gate installation pro in Texas?
Free quotes. No obligation. Verified professionals.
Get Free Quotes NowAlex R. is online
Gate Installation Specialist