Driveway Gate Installation in Texas
A driveway gate is the centerpiece of your property entrance. TX24H matches you with gate builders and installers who create stunning, functional driveway gates for Texas homes and ranches.
How It Works
Tell Us What You Need
Answer a few quick questions about your driveway gate installation needs.
Get Matched With Pros
We connect you with verified driveway gate installation professionals near you in Texas.
Compare & Choose
Review quotes, read real reviews, and pick the pro that fits your budget and timeline.
Driveway Gate Installation Prices in Texas
Average prices based on local market data. Actual prices may vary by city and scope.
| Service | Price Range |
|---|---|
Iron Driveway Gate (12 ft, Swing) Dual swing panels with posts and hinges | $2,500-$6,000 |
Wood/Steel Frame Driveway Gate (12 ft) Cedar panels on welded steel frame | $2,000-$5,000 |
Sliding Driveway Gate (16 ft) Track-mounted rolling gate with V-groove wheels | $3,500-$8,000 |
Custom Fabricated Estate Gate One-of-a-kind design with decorative metalwork | $5,000-$15,000 |
Gate Automation Add-On Motor, sensors, remote, and electrical work | $1,500-$4,000 |
Gate Column/Pillar Construction Brick or stone columns to mount gate hinges | $1,500-$4,000/pair |
Frequently Asked Questions
How much does a driveway gate cost in Texas?
A driveway gate in Texas costs $2,000 to $15,000 depending on material, size, and features. A standard 12-foot iron swing gate runs $2,500 to $6,000 installed. Adding an automatic opener increases the total by $1,500 to $4,000. Custom-fabricated estate gates with decorative scrollwork and stone pillars can exceed $20,000. Wood gates on steel frames offer a mid-range option at $2,000 to $5,000 that works well with ranch and Hill Country properties.
Should I choose a swing or sliding driveway gate?
Swing gates are more affordable and work best on flat driveways with enough clearance space for the gates to open fully. Each leaf needs space equal to half the gate width to swing open. Sliding gates are better for sloped driveways, properties with limited side clearance, and windy locations. Sliding gates cost more due to the track, rollers, and heavier framework, but they handle wind loads better and work on almost any terrain. Consider your daily use and property layout before deciding.
Do I need concrete columns for a driveway gate?
Heavy driveway gates need substantial support. Options include steel posts set in concrete, brick or stone columns, or stucco-covered block columns. Iron gates weighing 300 pounds or more require posts or columns with deep concrete footings, typically 36 to 48 inches deep in Texas clay soil. Brick or stone columns add significant curb appeal but cost $1,500 to $4,000 per pair. Steel posts are more affordable at $200 to $500 per pair but offer a simpler look.
How long does driveway gate installation take in Texas?
A standard driveway gate installation with pre-fabricated panels takes 1 to 2 days. Custom-fabricated gates require 2 to 4 weeks for fabrication before installation begins. Building brick or stone columns adds 2 to 3 days on-site. Adding an automatic opener takes an additional half day to full day depending on electrical requirements. The total project timeline from order to completion is typically 2 to 6 weeks for custom work and 1 to 2 weeks for standard installations.
Can a driveway gate be installed on a slope in Texas?
Yes, driveway gates can be installed on sloped terrain with proper planning. Swing gates on slopes need the arc of the gate swing to clear the ground surface at all points. V-track sliding gates work well on slopes by following the ground contour. Cantilever gates that are suspended above the ground handle slopes easily since they do not contact the surface. Your installer will measure the slope during the site visit and recommend the gate type that works best for your specific grade.
What permits do I need for a driveway gate in Texas?
Most Texas cities require a permit for driveway gate installation, especially when electrical work is involved for automatic openers. Some municipalities have setback requirements that dictate how far the gate must sit from the street or sidewalk. In rural unincorporated areas, permits may not be required. If your property is in an HOA community, architectural approval is almost always needed. Your gate installer should handle the permit process and know the specific requirements for your area.
Driveway Gate Installation Service Areas in Texas
We connect you with verified driveway gate installation professionals in these neighborhoods and surrounding areas across Texas.
Houston
Dallas
San Antonio
Austin
Fort Worth
El Paso
Arlington
Plano
Corpus Christi
Lubbock
Frisco
McKinney
Round Rock
Georgetown
Cedar Park
Pflugerville
Denton
Waco
Don't see your area? We likely cover it. Get a free quote and we'll match you with a local pro.
Your Data is Safe With TX24H
We never sell your information, never add you to marketing lists, and never share your data with anyone except the one pro matched to your request. Your info is automatically deleted after 30 days.
Related Fencing Services
Other fencing services available from licensed Texas professionals.
Ready to find the best driveway gate installation pro in Texas?
Free quotes. No obligation. Verified professionals.
Get Free Quotes NowAlex R. is online
Driveway Gate Installation Specialist