Concrete Driveway Installation in Southlake, TX
Compare free quotes from verified concrete driveway installation professionals in Southlake. Fast response, no obligation.
Describe Your Job
We outreach for you and get you the best deal, even for emergencies
What type of concrete driveway do you want?
Top 1 Best Concrete Driveway Installation in Southlake, TX (2026)
Ranked by customer reviews, response time, and service quality. Updated regularly.
Updated 2026 | 1 professionals reviewed
American Patio Enclosures
Best Choice"Professional, punctual, and did a great job. Highly recommend!"
Cannot decide? Get matched with the best pro for your specific project.
Concrete Driveway Installation Prices in Southlake, TX
Average prices based on local Southlake market data. Actual prices may vary by scope.
| Service | Price Range |
|---|---|
Standard broom finish driveway 4-inch slab with wire mesh, joints cut | $6-$10/sq ft |
Stamped concrete driveway Decorative pattern with color hardener | $12-$20/sq ft |
Exposed aggregate driveway Surface aggregate revealed after pour | $10-$16/sq ft |
Colored or stained driveway Integral color or post-cure acid stain | $8-$14/sq ft |
Old driveway demolition and removal Jackhammer, haul off, and site grading | $3-$6/sq ft |
Driveway extension or widening Adding width or length to existing driveway | $7-$12/sq ft |
Prices are estimates for the Southlake area. Get an exact quote for your project.
How It Works
Tell Us What You Need
Answer a few quick questions about your concrete driveway installation needs.
Get Matched With Pros
We connect you with verified concrete driveway installation professionals near you in Texas.
Compare & Choose
Review quotes, read real reviews, and pick the pro that fits your budget and timeline.
Concrete Driveway Installation FAQ - Southlake, TX
How much does a concrete driveway cost in Texas?
A standard concrete driveway in Texas costs $6 to $10 per square foot for broom finish, or $3,000 to $7,000 for a typical two-car driveway. Stamped concrete runs $12 to $20 per square foot. Demolishing an old driveway adds $3 to $6 per square foot. Total projects for a new two-car driveway with removal of old concrete average $5,000 to $12,000 depending on size and finish selections.
How thick should a concrete driveway be in Texas?
Residential driveways in Texas should be a minimum of 4 inches thick with 6-inch thickened edges where vehicles transition from the street. If heavy trucks or RVs will use the driveway, 5 to 6 inches is recommended. The subgrade preparation is equally important on Texas clay soil. A compacted 4-inch aggregate base over geotextile fabric prevents soil moisture from undermining the slab from below.
Will a concrete driveway crack in Texas?
All concrete driveways develop some cracking over time, but proper construction minimizes it significantly. Control joints cut every 8 to 10 feet create planned weak points where cracks occur invisibly within the joint. Fiber mesh or welded wire reinforcement holds micro-cracks together. On Texas expansive clay, proper subgrade preparation and moisture barriers are critical. Most cracking issues stem from inadequate base preparation, not the concrete itself.
How long before I can drive on a new concrete driveway?
You can walk on new concrete after 24 to 48 hours. Light passenger vehicles can drive on it after 7 days. Heavy trucks, RVs, and trailers should wait 28 days for full cure. In Texas summer heat above 95 degrees, curing accelerates but the surface needs extra moisture via wet curing blankets or spray-on curing compound. Never allow heavy loads before full cure, as premature loading causes permanent surface damage.
Do I need a permit for a driveway in Texas?
Most Texas cities require a permit for new driveway construction or significant widening. The permit ensures the driveway meets setback requirements, does not obstruct drainage, and has a proper approach apron connecting to the street. Permit costs range from $50 to $300. Your concrete contractor typically handles the permit process. Some HOAs have additional restrictions on driveway width, material, and color.
How long does a concrete driveway last in Texas?
A properly installed concrete driveway in Texas lasts 25 to 40 years with basic maintenance. Sealing the surface every three to five years prevents water penetration and staining. Keeping control joints clean and filled prevents water from reaching the subgrade. The biggest lifespan threat in Texas is foundation movement from clay soil, which can crack the slab. Proper base preparation at installation is the single best investment for longevity.
Concrete Driveway Installation Near You in Southlake, TX
We connect you with top-rated concrete driveway installation professionals serving all Southlake neighborhoods and surrounding areas.
Your Data is Safe With TX24H
We never sell your information, never add you to marketing lists, and never share your data with anyone except the one pro matched to your request. Your info is automatically deleted after 30 days.
Common Concrete Driveway Installation Problems in Southlake
These are the most frequent issues our customers need help with. Sound familiar?
Cracked Driveway
Cracks, heaving, or settling in concrete driveway from soil movement.
Foundation Issues
Cracks in walls, sticking doors, or uneven floors from foundation settling.
Patio Damage
Crumbling, stained, or uneven patio surface needing repair or replacement.
Walkway Repair
Tripping hazards from lifted, cracked, or sunken concrete sidewalks.
Retaining Wall
Leaning, cracking, or failing retaining wall no longer holding soil.
New Pour
New driveway, patio, or slab installation from scratch.
Also Looking For?
Other popular home services in Southlake
Other Concrete & Masonry Services in Southlake
More concrete & masonry services available from licensed professionals in Southlake, TX.
Find the right concrete driveway installation pro in Southlake
Compare verified professionals, read real reviews, and call directly.